Clean milk container
- Disassemble the milk container. Rinse it with warm water. Remove all visible residues
with a sponge. - Soak all the parts in warm water (40°C) for 30 minutes. Do not wash in the dishwasher.
- Rinse thoroughly. Ensure that the inlet is clean. Do not use abrasive material that
can damage the surface of the container. - Dry all parts with a clean towel, cloth, or paper, and reassemble.
Steam wand
- Disassemble the steam wand. Pull off the stainless-steel shell and take off the black
inner tube by rotating it towards unlock and pull. - Clean the parts in warm water. Do not wash in the dishwasher.
- Dry all parts and reassemble.
Descaling
Fill the water tank with water up to the MAX line. Pour descaling agent into the water tank.
Use a container that is larger than 1.6L when descaling. Empty it before starting the 2nd
phase.
- After the machine is preheated, press and hold the auto clean button for 5
seconds. - Press espresso button to start the 1st phase cycle.
- When the 1st phase is finished, the Lungo icon is lit. Press it to start the 2nd
phase. - When the 2nd phase is finished, the machine goes back to normal function.
Daily cleaning and maintenance
Do not use any strong cleaning agent or solvent cleaner. Use a damp cloth and mild cleaning agent to clean the surface of the machine.
Do not put any components in the dishwasher.
There may be condensation, and that water will end up in the drip tray. Empty it and clean the tray before it overflows.
Lift the lever, take out all the capsule or ground coffee of the adapters. Remove the drip tray, empty it and rinse. Remove water tank, and rinse with water before filling it with fresh water for use. Insert the adapter, close the lever, place a container under the coffee dispenser, and press the Lungo button to rinse the machine.
Do not store the machine in a cold environment, it may freeze the water in the machine
and cause damages and leakage.