For a better experience, buy the Wilfa espresso accessories on Wilfa.com.
CAPSULE
There are two sorts of capsules you can use with the adapters: Dolce gusto and Nespresso
Original.
1. Choose your desired coffee capsule and place it into the correct adapter.
2. Lift the lever completely and insert the adapter. Close the lever.
3. Place a cup under the coffee dispenser.
4. Press the preferred coffee button.
GROUND COFFEE
We recommend that you use about 8-10 grams of coffee beans. Grind them to espresso size.
1. Place the ground coffee into the basket in the adapter.
2. Use the tamper to push the coffee firmly. It shall not exceed the max line.
3. Lift the lever completely. Insert the adapter into the coffee machine. Close the lever.
4. Place a cup under the coffee dispenser.
5. Press the preferred coffee button.
CAPPUCCINO AND LATTE
Place the adapter with coffee of your choice (capsule or ground coffee) into the appliance. Recommended coffee is ristretto or espresso.
1. Fill the milk container with milk up to the max line.
2. Press the cappuccino or latte button.
Cappuccino: Recommended proportions are 50ml coffee and 120ml milk.
Latte Macchiato: Recommended proportions are 50ml coffee and 220ml milk.
STEAM MILK
1. Press the side panel to open it. Take out the steam wand.
2. Insert the wand into the slot. Make sure it is fully inserted, otherwise it may drop out
during steaming. When it is installed, this icon will appear on the display:
3. Fill a milk jug with milk, put the tip of the steam wand into the milk.
4. Press the milk icon. It will preheat before it starts to steam.
5. Press the milk icon again to stop the frothing.
ENERGY SAVING
After 10 minutes of no activity, the unit goes
into energy saving-mode.
PROGRAMMING QUANTITY
SET THE COFFEE VOLUME
The volume can be adjusted from 25-250ml.
1. Lift the lever and insert the adapter with the coffee of your choice.
2. Push and hold button until the desired volume is reached. Release the button.
The chosen amount is stored automatically. When you use it again, the cup size has been
memorized.
SET MILK VOLUME
Use the milk container. Make sure it is correctly installed. We recommend that you fill the container with water, so you do not waste any milk.
1. Lift the lever and insert the adapter without coffee.
2. Push and hold the button (Cappuccino or latte macchiato) util the desired milk volume
is reached. Release the button. The chosen volume is stored automatically.
The amount of milk is saved until the next time you choose the same coffee (Cappuccino or Latte).
RESTORE FACTORY SETTINGS
If you want to restore the quantities to factory
settings:
1. Press the on/off button. Wait until it is preheated.
2. Press espresso and lungo buttons at the same time for 5 seconds.
The machine makes 2 beeps and the beverage icons on the display flash for 5 seconds, this indicates that it is restored.